Kyocera error code
C2000Main motor error
🔧 Needs an engineer
What it means
The main drive motor did not reach or hold its speed. Everything it drives — drum, developer, feed rollers — stops with it.
Common causes
- Jammed paper or a seized gear loading the motor
- Worn drive gears
- Faulty main motor or its driver board
What you can safely try
- 1Switch the machine off, wait 30 seconds and switch it on again — note whether the code comes back.
- 2Open the covers and remove any jammed or torn paper — a stuck sheet can stall the motors.
- 3Check that all trays, the toner and the drum unit are pushed fully home and every cover is closed.
- 4Take a photo of the display and note the machine model and its meter reading before you call.
⚠️ If the code comes back after a restart, stop using the machine and call an engineer — running it on can damage more parts.
The exact meaning can vary slightly between models. Send us the model number for a precise diagnosis.
